Top Page | English | 简体中文 | 繁體中文 | 한국어 | 日本語
Tuesday, 21 March 2017, 10:00 HKT/SGT
Share:
    

Source: ULVAC, Inc.
ULVAC Launches NA-1500 Dry Etching System for 600mm Advanced Packaging Substrates

Chigasaki, Japan, Mar 21, 2017 - (JCN Newswire) - ULVAC, Inc. is pleased to announce the NA-1500 dry etching system for 600mm advanced packaging substrates, providing for uniform Descum and Ti etching processes.

Higher data transfer speeds require higher-density packaging technologies, while advanced mobile and wireless devices require thinner and higher-pin-count IC packages. Fan-Out Wafer Level Packaging (FO-WLP) is widespread, while Panel Level Packaging increases substrate size from 300mm to 600mm.

While there are many 200mm/300mm wafer dry etching systems in the market today, there was no dry etching system for 600mm substrates, providing for a uniform Descum process and Ti etching process. ULVAC developed the new system to address this need, and support mass-produced packaging processes.

The new NA-1500 dry etching system is made possible by enhancing our proven plasma source. Our plasma source enables fast, low-temperature etching in the resin layer, which had been previously impossible with existing CCP methods.

Our plasma source is also applicable to fluorine gases, so seed layer Ti etching, which requires a wet process, can proceed without side etching. SiO2 and SiN etching is available on the NA-1500 as well.

The NA-1500 dry etching system provides stable transfer and processes without abnormal discharge, ensuring warpage from the enlarged substrate is never an issue.

Applications:
1. Descum
2. Desmear
3. Surface treatment (Hydrophobicity <-> Hydrophilicity)
- Pretreatment for wet process such as plating, etc.
- Pretreatment for underfill
4. Resin material ashing
5. Seed layer Ti etching
6. SiO2/SiN etching

Images:
NA-1500 dry etching system -- http://bit.ly/2mTlx02
NA-1500 process chamber -- http://bit.ly/2nw2R4F

Notes:
1. Descum: Removal of residue (scum) in photolithography of photopolymer
2. CCP: Capacitive Coupling Plasma
3. Desmear: Removal of residue (smear) in Via formation with laser drill

Full Release with Process Performance (PDF) -- http://bit.ly/2nJgf4M

Our Future:
ULVAC has sold more than 200 dry etching systems since releasing our first 200mm wafer system 20 years ago. As electronic components become smaller and thinner, and higher-speed processing works on lower power in line with developments in IoT, manufacturing technologies for advanced packaging become more important. ULVAC supports this industry by providing systems that meet customer's future needs for flexible, invisible and wearable devices.


About ULVAC, Inc.

ULVAC, Inc., is a Japan-based vacuum equipment manufacturer. ULVAC was founded in 1952 and has contributed to development of industry and technology through comprehensive use of vacuum technology and its peripheral technology. We created "ULVAC SOLUTIONS" based on our one of a kind technologies built upon long years of research, development, and production technology innovations. We offer this solution composed of equipment, materials, analytic evaluation, vacuum components and other various services, for flat panel displays, solar cells, semiconductors, electronic components, and general industrial equipment. For more information, please visit www.ulvac.co.jp/en/.

Contact:
Masahiro Harada
Corporate Sales & Marketing Division I
Advance Electronics Equipment Sales Dept.
ULVAC, Inc.
TEL: +81-467-89-2139 / FAX: +81-467-89-2254
https://www.ulvac.co.jp/
https://www.ulvac.co.jp/en/
https://www.ulvac.co.jp/products_e/


Mar 21, 2017 10:00 HKT/SGT
Source: ULVAC, Inc.

Topic: New Product
Sectors: Electronics, Nanotechnology, Engineering
http://www.acnnewswire.com
From the Asia Corporate News Network


Copyright © 2017 ACN Newswire. All rights reserved. A division of Asia Corporate News Network.


Multimedia
NA-1500 dry etching system
View Image
 
NA-1500 process chamber
View Image
 

ULVAC, Inc.
Nov 24, 2016 10:00 HKT/SGT
ADVANCE RIKO Introduces 'F-PEM' Atmospheric Thermoelectric Module Evaluation System
Sept 25, 2015 15:00 HKT/SGT
ULVAC Launches the Revolutionary Dry Vacuum Pump Accessory ECO-SHOCK ES4A
Sept 25, 2015 15:00 HKT/SGT
ULVAC Launches G-TRAN Series Multi Ionization Gauge ST2
Aug 31, 2015 09:00 HKT/SGT
ADVANCE RIKO Launches Mini Lamp Annealer 'MILA-5050'
July 14, 2015 11:00 HKT/SGT
ULVAC Launches High-purity Niobium Material for Superconducting Accelerators
Apr 8, 2015 16:30 HKT/SGT
ULVAC and Robert Bosch Sign Basic Agreement for Joint Development of Piezoelectric Device (PZT) for MEMS
Mar 24, 2015 16:05 HKT/SGT
ULVAC Announces World's First, Low Temperature PZT Sputtering Technology
Feb 25, 2015 10:00 HKT/SGT
ULVAC Launches New Addition to the HELIOT 900 Series Leak Detector Family
Nov 17, 2014 09:15 HKT/SGT
ULVAC-RIKO to Sell High Temperature Rapid Thermal Annealing System HT-RTA59HD
Sept 18, 2014 08:30 HKT/SGT
ULVAC to Launch Ceramic Ball Bearing Molecular Pump UTM300B
More news >>
 News Alerts
Copyright © 2017 ACN Newswire - Asia Corporate News Network
Home | About us | Services | Partners | Events | Login | Contact us | Privacy Policy | Terms of Use | RSS
US: +1 800 291 0906 | Beijing: +86 10 8405 3688 | Hong Kong: +852 2217 2912 | Singapore: +65 6304 8926 | Tokyo: +81 3 5791 1818

Connect With us: