|
|
|
|
|
|
| Researchers at Kyoto University have found that molybdenum silicides can improve the efficiency of turbine blades in ultrahigh-temperature combustion systems. |
TSUKUBA, Japan, Sept 24, 2016 - (ACN Newswire) - Gas turbines are the engines that generate electricity in power plants. The operating temperatures of their combustion systems can exceed 1600 degrees Celsius. The nickel-based turbine blades used in these systems melt at temperatures 200 degrees Celsius lower and thus require air-cooling to function. Turbine blades made out of materials with higher melting temperatures would require less fuel consumption and lead to lower CO2 emissions.
 | | Electron micrographs of directionally solidified (DS) ingots of binary composites; Temperature dependence of yield stress of DS MoSi2/Mo5Si3 eutectic composites and some high-temperature materials. (c) 2016 Hirotaka Matsunoshita, Yuta Sasai, Kosuke Fujiwara, Kyosuke Kishida and Haruyuki Inui. |
Materials scientists at Japan's Kyoto University investigated the properties of various compositions of molybdenum silicides, with and without additional ternary elements.
Previous research showed that fabricating molybdenum silicide-based composites by pressing and heating their powders - known as powder metallurgy - improved their resistance to fracturing at ambient temperatures but lowered their high-temperature strength, due to the development of silicon dioxide layers within the material.
The Kyoto University team fabricated their molybdenum silicide-based materials using a method known as "directional solidification," in which molten metal progressively solidifies in a certain direction.
The team found that a homogeneous material could be formed by controlling the solidification rate of the molybdenum silicide-based composite during fabrication and by adjusting the amount of the ternary element added to the composite.
The resulting material starts deforming plastically under uniaxial compression above 1000 degrees Celsius. Also, the material's high-temperature strength increases through microstructure refinement. Adding tantalum to the composite is more effective than adding vanadium, niobium or tungsten for improving the strength of the material at temperatures around 1400 degrees Celsius. The alloys fabricated by the Kyoto University team are much stronger at high temperatures than modern nickel-based superalloys as well as recently developed ultrahigh-temperature structural materials, the researchers report in their study published in the journal Science and Technology of Advanced Materials.
For further information please contact:
Hirotaka Matsunoshita, Yuta Sasai, Kosuke Fujiwara, Kyosuke Kishida and Haruyuki Inui*: Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606-8501, Japan, Hirotaka Matsunoshita, Kyosuke Kishida and Haruyuki Inui are also at the Center for Elements Strategy Initiative for Structural Materials (ESISM), Kyoto University, Sakyo-ku, Kyoto 606-8501, Japan. *E-mail: inui.haruyuki.3z@kyoto-u.ac.jp
Article information:
"Plastic deformation of directionally-solidified ingots of binary and some ternary MoSi2/Mo5Si3 eutectic composites", Hirotaka Matsunoshita, Yuta Sasai, Kosuke Fujiwara, Kyosuke Kishida and Haruyuki Inui: Science and Technology of Advanced Materials Vol. 17 (2016) p.1218248.
Accepted author version posted online: 28 Jul 2016, http://tandfonline.com/doi/abs/10.1080/14686996.2016.1218248
Published online: 23 Sep 2016, http://tandfonline.com/doi/full/10.1080/14686996.2016.1218248
Journal Information:
Science and Technology of Advanced Materials (STAM) is the leading open access, international journal for outstanding research articles across all aspects of materials science. Our audience is the international materials community across the disciplines of materials science, physics, chemistry, biology as well as engineering.
The journal covers a broad spectrum of materials science research including functional materials, synthesis and processing, theoretical analyses, characterization and properties of materials. Emphasis is placed on the interdisciplinary nature of materials science and issues at the forefront of the field, such as energy and environmental issues, and medical and bioengineering applications. http://tandfonline.com/loi/tsta20/current.
For more information about the journal:
Mikiko Tanifuji
Publishing Director,
Science and Technology of Advanced Materials
Email: TANIFUJI.Mikiko@nims.go.jp
Press release distributed by ResearchSEA for Science and Technology of Advanced Materials.
Topic: Research and development
Source: Science and Technology of Advanced Materials
Sectors: Design Process, Science & Nanotech, Science & Research, Energy, Alternatives
http://www.acnnewswire.com
From the Asia Corporate News Network
Copyright © 2024 ACN Newswire. All rights reserved. A division of Asia Corporate News Network.
|
|
|
|
|
|
|
| Science and Technology of Advanced Materials |
| Oct 25, 2024 23:00 HKT/SGT |
|
Machine learning can predict the mechanical properties of polymers |
| July 30, 2024 20:00 HKT/SGT |
|
Dual-action therapy shows promise against aggressive oral cancer |
| Apr 17, 2024 22:00 HKT/SGT |
|
A new spin on materials analysis |
| Apr 12, 2024 18:00 HKT/SGT |
|
Kirigami hydrogels rise from cellulose film |
| Feb 27, 2024 08:00 HKT/SGT |
|
Sensing structure without touching |
| Nov 21, 2023 07:00 HKT/SGT |
|
Nano-sized probes reveal how cellular structure responds to pressure |
| Nov 17, 2023 10:00 HKT/SGT |
|
Machine learning techniques improve X-ray materials analysis |
| Nov 14, 2023 20:00 HKT/SGT |
|
A bio-inspired twist on robotic handling |
| Oct 17, 2023 08:00 HKT/SGT |
|
GPT-4 artificial intelligence shows some competence in chemistry |
| Aug 24, 2023 09:00 HKT/SGT |
|
Closing the loop between artificial intelligence and robotic experiments |
| More news >> |
 |
|
|
